
Downlight
ENSHINE LED downlights offer compact recessed designs with SMD or COB LED options, 3CCT selection and dimmable versions for residential, commercial and hospitality lighting. High CRI, wide beam angle and OEM/ODM customization for global projects.

3CCT DIP DOB LED Downlight 5W-12W

Rotatable Downlight Plastic LED 360°

Recessed LED Downlight

10W SMD LED Downlight

3CCT DIP DOB Downlight LED

MR16 Module 3CCT – LED Replacement for GU10 MR16

Iron Downlight Recessed LED
LED Downlights for Residential, Commercial and Hospitality Projects
Enshine's LED downlight range covers the recessed fixtures that distributors, wholesalers and project contractors specify most often: compact recessed designs with SMD or COB LED sources, 3CCT selectable versions for flexible color temperature, slim driver-on-board (DOB) models for shallow ceiling voids, and dimmable options for residential, commercial and hospitality lighting.
Across the range you will also find rotatable gimbal downlights for directional accent lighting, die-cast aluminium and iron-shell housings where heat dissipation and service life matter, surface-mount SMD models including Triac-dimmable versions, and smart downlights for connected projects. Every model supports OEM/ODM customization, so you can align wattage, color temperature, CRI and housing with your market requirements.
Why Quality Matters When Choosing LED Downlights
A downlight sits inside the ceiling structure, so a failed fixture means ceiling access, not a simple bulb swap. The components that decide long-term reliability — the light source, the driver and the housing — are chosen at specification stage. The five factors below are what experienced buyers check before comparing prices.
Five Factors to Check Before Ordering
Luminous efficacy and real output
Compare the specified lm/W figure and lumen output for the actual cut-out size, not wattage alone. Enshine downlights specify efficacy levels such as 90 lm/W on the 3CCT DOB series and 75–90 lm/W across the slim DOB range, so the same ceiling opening can be matched to the brightness your project needs.
Glare control and light quality
Beam angle, CRI and diffusion decide whether a downlight feels comfortable in a finished room. The Enshine range is specified with high CRI (C.R.I. >80 across the series) and wide beam angles, and COB versions produce a smooth, uniform beam without visible dots for retail, hospitality and display settings.
Moisture protection for the installation environment
Bathrooms, kitchens and covered outdoor areas need fixtures whose specified protection rating matches the humidity they will face. Check the IP rating stated for the exact model in your datasheet rather than assuming all recessed fixtures are sealed the same way.
Driver quality and electrical design
The driver is the component most likely to fail. Driver-on-board (DOB) designs remove the separate driver box and simplify installation, while housing-based models allow component-level service. Wide AC90–265V input and a power factor above 0.9 on models such as the YX-DLC keep fixtures compatible across international mains systems.
Installation method and cut-out size
Recessed downlights need a prepared ceiling opening; surface-mounted models suit concrete ceilings and shallow voids. Cut-out sizes across the range run from Φ70mm and Φ90mm on standard models up to 75–190mm on the slim DOB series, so measure the opening before ordering to avoid ceiling rework.
The Enshine Difference: 20 Years of Downlight Manufacturing
Enshine Lighting was founded in 2006 and has spent more than 20 years manufacturing LED lighting as an OEM/ODM partner for global buyers, with a team of over 300 employees working in our own factory.
Our in-house production and testing — from driver and incoming material inspection to product aging tests before shipment — backs every downlight batch we ship. Tell us your target market, wattage and cut-out requirements, and our sales team will recommend suitable models and confirm the certificates available for your destination.
Buyer FAQ
What is the MOQ for LED downlights?
Minimum order quantities depend on the model, wattage mix and customization level. Send your target wattages, cut-out sizes and estimated volumes with your inquiry, and our team will confirm the applicable terms.
Which certifications do Enshine downlights hold?
Certification requirements differ by market and model. Send your destination market with the inquiry and we will confirm the certificates currently available for the series you are sourcing.
Can you provide OEM and ODM customization?
Yes. Enshine supports OEM/ODM cooperation, including wattage, color temperature, CRI, cable and plug configurations, housing and packaging options tailored to your market.
What is the typical lead time for a downlight order?
Lead time depends on order quantity, model mix and customization. Our team confirms the production schedule with your quotation, so share your project timeline when you inquire.
Related Guides for Downlight Buyers
Continue your research with these verified resources on our site.
- 3CCT and COB LED Downlights: Choosing the Right Recessed Fixture
Our in-depth guide compares 3CCT selectable fixtures with COB light sources and walks through recessed and surface-mount options.
- LED Panel Lights
For offices, schools and ceiling-grid projects, panel lights complement recessed downlights in the same specification.
- LED Ceiling Lights
Surface-mounted ceiling lights for spaces where cutting a recessed opening is not practical.
Our Factory
Two manufacturing facilities with integrated production capabilities.






Our Laboratory & Testing Equipment
Every fixture passes rigorous testing in our in-house lab before it reaches your market.








